
Nano Insulation Board
Product Overview
Nano insulation board is a high-performance inorganic thermal insulation board made based on the nano-microporous principle. It uses lightweight inorganic silica and ceramic fibers with very low thermal conductivity as raw materials, and aluminum foil with high reflectivity as the base layer. It is formed through a single-layer composite structure via continuous coating and compaction processes. The product's thermal conductivity is even lower than that of still air, and its insulation performance is 3-5 times better than traditional insulation materials. It is currently an excellent thermal insulation material that can significantly reduce the thickness of insulation structures and achieve energy savings in industrial high-temperature equipment.
Technical Principle
Nano insulation board achieves excellent thermal insulation performance thanks to its nano-microporous structure. The numerous nanoscale pores formed inside the material effectively restrict the thermal motion of air molecules, greatly reducing heat conduction efficiency. Paired with a high-reflectivity aluminum foil base layer, it can effectively reflect infrared thermal radiation, reducing radiative heat transfer paths. Under this dual effect, it delivers far superior insulation compared to traditional insulation materials. The product uses a pure inorganic raw material combination, offering good thermal stability and releasing no harmful substances under high-temperature conditions, making it suitable for the insulation needs of various high-temperature industrial scenarios.
Core Performance Parameters
1. Long-term operating temperature: 400–1000℃, capable of withstanding high-temperature conditions above 1000℃ for extended periods
2. Thermal conductivity: 2–10 times lower than conventional insulation materials; at 800℃, it is only 0.035 W/m·K
3. Service life: Can be used as a permanent insulation layer with a service life of over 5–10 years
4. Safety and environmental protection: Made from a pure inorganic material combination with good thermal stability and no release of harmful substances
5. Cost-effectiveness: Priced 50% lower than similar foreign products; when used in conjunction, it can achieve 10–30% energy savings compared to conventional materials
Core Advantages
1. Ultra-low thermal conductivity: Its thermal conductivity is far below that of conventional insulation materials. Even under 800℃ high-temperature conditions, it maintains a low thermal conductivity level of 0.035 W/m·K, delivering outstanding insulation performance and effectively reducing heat loss from high-temperature equipment.
2. High-temperature resistance and non-combustibility: Its long-term operating temperature range covers 400–1000℃, and it can withstand conditions above 1000℃. As a non-combustible inorganic material, it meets the insulation needs of various high-temperature industrial devices.
3. Thinner insulation structures: It can significantly reduce the thickness of insulation layers, increasing the working space inside kilns and equipment while also greatly shrinking the external dimensions of kilns and equipment, saving floor space and making equipment more compact and convenient.
4. Long lifespan and low maintenance: It can be used as a permanent insulation layer with a service life of 5–10 years or more, outlasting traditional rigid refractory bricks and requiring lower maintenance costs.
5. Safety and environmental friendliness: Made from a pure inorganic material combination with good thermal stability and no release of harmful substances under high temperatures, it complies with environmental requirements in industrial settings.
6. High cost-effectiveness: Priced at only 50% of similar foreign products, and capable of achieving 10–30% energy savings when used in conjunction, it effectively reduces enterprises' production and operational costs.
Advantages Compared to Traditional Rigid Refractory Bricks
Compared to traditional rigid refractory bricks, nano insulation board offers multi-dimensional performance advantages: First, it is lighter in weight, enabling overall equipment weight reduction, lower construction difficulty, and higher installation efficiency; second, it has a longer service life, lasting 5–10 years or more with reduced subsequent maintenance costs; third, it consumes less energy, with excellent insulation performance effectively reducing heat loss and lowering energy consumption, making it more environmentally friendly; fourth, it exhibits superior temperature resistance, capable of enduring high-temperature conditions above 1000℃ for extended periods, meeting the usage needs of various high-temperature industrial scenarios.
Core Value of the Product
1. Space optimization value: It can significantly reduce the thickness of insulation layers, serving as the optimal alternative in scenarios where insulation space or dimensions are limited and cold-side temperatures fail to meet expectations. At the same time, it shrinks the external dimensions of equipment, saves floor space, and increases the effective working volume inside the equipment.
2. Energy-saving and cost-reducing value: Its excellent insulation performance effectively reduces heat loss from high-temperature equipment, cutting consumption of electricity, natural gas, and other energy sources, thereby lowering enterprise production costs. Additionally, its price is only 50% of similar foreign products, providing a significant purchasing cost advantage.
3. Operating condition optimization value: It enables kilns and equipment to achieve lower cold-side temperatures, addressing issues such as excessive surface heating and personnel operation risks caused by high temperatures, thus enhancing the safety and reliability of equipment operation.
4. Long-term use value: Its long lifespan reduces the frequency of subsequent maintenance and replacement, lowering lifecycle usage costs. Moreover, its environmentally friendly nature with no release of harmful substances ensures compliance with environmental regulations in industrial production.
Target Customer Groups
Industrial kiln manufacturers, lithium battery production equipment vendors, electrolytic aluminum producers, petrochemical equipment manufacturers, cement production equipment vendors, industrial heat treatment equipment producers, industrial insulation material suppliers, and high-temperature equipment operation and maintenance service providers, among others.
Application Scenarios
The product can be widely applied to backing insulation scenarios for various high-temperature industrial equipment, specifically including: roller kilns, tunnel kilns, pit furnaces, lithium battery kilns, rotary kilns, and electrolytic aluminum cells in the industrial kiln sector; heat treatment furnaces and cracking furnaces in the petrochemical sector; decomposition furnaces, grate coolers, tertiary air ducts, flue gas chambers, and other types of high-temperature equipment in the cement industry. It is particularly well-suited for high-temperature equipment operating conditions where insulation space is limited, cold-side temperature requirements are high, and there is a need for energy conservation and consumption reduction.
Solving Industry Pain Points
1. Addressing the pain point of high thermal conductivity and poor insulation performance in traditional insulation materials: The product's thermal conductivity is lower than that of still air, and its insulation performance is 3–5 times better than traditional materials. It effectively reduces heat loss and improves the thermal efficiency of high-temperature equipment.
2. Solving the pain point of thick traditional insulation layers occupying excessive space: It can significantly reduce the thickness of insulation layers, increasing internal working space while shrinking external dimensions and saving floor space.
3. Resolving the pain point of short lifespans and high maintenance costs in traditional insulation materials: The product can serve as a permanent insulation layer with a service life of 5–10 years or more, substantially reducing subsequent maintenance and replacement costs.
4. Overcoming the pain point of harmful substance release and poor environmental performance in traditional insulation materials under high temperatures: Made from pure inorganic raw materials, it releases no harmful substances under high temperatures and complies with environmental requirements.
5. Mitigating the pain point of high prices and procurement costs for imported equivalents: Priced at only 50% of similar foreign products, it offers outstanding cost-effectiveness and effectively reduces enterprise procurement costs.
6. Alleviating the pain point of excessively high cold-side temperatures in high-temperature equipment affecting operational safety: Its excellent insulation performance effectively lowers equipment surface temperatures, improves the operating environment, and enhances production safety.
Frequently Asked Questions (FAQ)
Q1: What are the advantages of nano insulation board's insulation performance compared to traditional insulation materials?
A: Nano insulation board is made based on the nano-microporous principle. Its thermal conductivity is lower than that of still air, and its insulation performance is 3–5 times better than traditional materials. At 800℃, its thermal conductivity is only 0.035 W/m·K, far below that of conventional insulation materials by 2–10 times, delivering outstanding insulation effects.
Q2: What is the long-term operating temperature range of nano insulation board?
A: The product's long-term operating temperature range covers 400–1000℃, capable of withstanding high-temperature conditions above 1000℃ for extended periods, meeting the insulation needs of various high-temperature industrial devices.
Q3: How long is the service life of nano insulation board?
A: The product can serve as a permanent insulation layer with a service life of 5–10 years or more, outlasting traditional rigid refractory bricks and requiring lower maintenance costs.
Q4: Is nano insulation board environmentally friendly?
A: Made from a pure inorganic material combination with good thermal stability, it releases no harmful substances under high-temperature conditions and complies with environmental requirements in industrial settings.
Q5: What about the cost-effectiveness of nano insulation board?
A: Priced 50% lower than similar foreign products, it can achieve 10–30% energy savings when used in conjunction, effectively reducing enterprise procurement and production operational costs.
All Rights Reserved © 2026 HUAYAN