
Refractory Plastic
Index | Clay-based | High-alumina | Corundum-based | |
|---|---|---|---|---|
Al₂O₃% | 54.5 | 77.0 | 90.0 | |
Line change after heating% | 110℃,24h | -0.35 | -0.47 | -0.10 |
1500℃,24h | +1.96 | +0.40 | -0.80 | |
Bending strength | 110℃,24h | 6.3 | 5.3 | 13.2 |
Hot bending strength | 1100℃,1h | 1.0 | 1.3 | >20 |
Max. service temperature℃ | 1500 | 1600 | 1900 | |
Product Overview
Refractory plastic is a hard paste-like amorphous refractory material that can be shaped by ramming, vibration, or extrusion. It is made by thoroughly mixing refractory aggregates, powders, binders, and additives with water or other liquids according to specific gradations. Based on material composition, products are divided into clay-based, high-alumina, and corundum-based types. Different materials offer distinct refractory performance and mechanical strength, meeting the needs of various high-temperature kiln operating conditions. The product features formwork-free construction, thermal shock resistance, and high-temperature wear resistance, enabling seamless integral lining installation, enduring frequent kiln start-stop cycles, effectively extending overall kiln life, while also satisfying special requirements for irregular lining construction and rapid kiln repairs.
Product Definition and Classification
As an important category of amorphous refractories, refractory plastic differs from traditional shaped refractory bricks and castables. It leaves the factory in a hard paste or lump form, requiring no pre-molding. It can be directly rammed, vibrated, or extruded on-site, offering excellent construction convenience.
Based on refractory aggregate material, products include clay-based, high-alumina, corundum-based, silica, magnesia, chromia, zircon, and silicon carbide refractory plastics. The three main types promoted here are clay-based, high-alumina, and corundum-based, covering all operating conditions from medium to ultra-high temperatures.
According to binder type, products are classified as water glass-bonded, phosphate-bonded, and organic-bonded refractory plastics. Different binders suit different construction and hardening conditions.
By hardening method, products are divided into air-hardening and heat-hardening types. Air-hardening plastics naturally harden at room temperature, while heat-hardening plastics require baking to complete hardening. Users can flexibly choose based on site conditions.
Technical Parameters
The specific technical parameters of the three main refractory plastic types are as follows:
1. Clay-based refractory plastic: Al₂O₃ content 54.5%; line change after heating at 110℃×24h is -0.35%, at 1500℃×24h is +1.96%; bending strength at 110℃×24h is 6.3MPa, hot bending strength at 1100℃×1h is 1.0MPa; max. service temperature 1500℃.
2. High-alumina refractory plastic: Al₂O₃ content 77.0%; line change after heating at 110℃×24h is -0.47%, at 1500℃×24h is +0.40%; bending strength at 110℃×24h is 5.3MPa, hot bending strength at 1100℃×1h is 1.3MPa; max. service temperature 1600℃.
3. Corundum-based refractory plastic: Al₂O₃ content 90.0%; line change after heating at 110℃×24h is -0.10%, at 1500℃×24h is -0.80%; bending strength at 110℃×24h is 13.2MPa, hot bending strength at 1100℃×1h exceeds 20MPa; max. service temperature 1900℃.
Core Characteristics
1. Formwork-free construction convenience: The product leaves the factory as a hard paste, eliminating the need for pre-molded forms. It can be directly rammed, vibrated, or extruded on-site, significantly reducing mold-making costs and time before construction, shortening the overall construction period.
2. Excellent thermal shock resistance: The product exhibits strong tolerance to sudden temperature changes, suitable for kilns with frequent starts and stops, preventing lining cracks and spalling caused by drastic temperature fluctuations, thereby enhancing overall lining lifespan.
3. Outstanding high-temperature wear resistance: Products of different materials all possess superior high-temperature mechanical strength. Corundum-based products achieve hot bending strengths exceeding 20MPa at 1100℃, resisting erosion from high-temperature gas flows and materials, ideal for kiln burners, flame deflectors, and other high-wear areas.
4. Seamless integral lining: The product allows continuous construction to form a jointless integral lining structure, avoiding air and heat leakage issues associated with traditional bricklaying joints, improving overall kiln insulation and thermal efficiency.
5. Strong adaptability for rapid repairs: The product can be applied directly to damaged areas without lengthy furnace cooling periods. After application, it can be quickly put back into service, greatly shortening repair downtime and reducing production losses.
Core Value of the Product
1. Reduced construction costs: The formwork-free construction feature cuts material and labor costs for mold-making, while shorter construction periods lower overall labor and time expenses.
2. Extended kiln lifespan: Thermal shock and high-temperature wear resistance reduce lining cracking and wear, while the seamless integral structure prevents joint damage, collectively extending lining life and decreasing future maintenance frequency.
3. Lowered production losses: Rapid repair capabilities shorten furnace downtime for maintenance, reducing production losses caused by outages and boosting enterprise productivity.
4. Improved kiln thermal efficiency: Seamless integral linings minimize heat loss through joints, enhance insulation, reduce fuel consumption, and help enterprises achieve energy savings and cost reductions.
Target Customer Groups
Steel smelting companies, non-ferrous metal smelting companies, power boiler manufacturers and operators, waste incineration power generation companies, industrial kiln construction firms, refractory material traders, kiln operation and maintenance service providers, and heat treatment equipment manufacturers.
Application Scenarios
This product is widely applicable for lining construction and repair in various high-temperature industrial kilns, with specific compatible scenarios including:
1. Steel smelting sector: Roof and wall construction for steel rolling reheating furnaces, soaking furnaces, and annealing furnaces, as well as wear-resistant lining work around burner areas.
2. Power boiler sector: Wrapping construction for CFB boiler flame deflectors, wall-penetrating pipes, and water-cooled walls.
3. Environmental incineration sector: Irregular-shaped lining construction for waste incinerators and hazardous waste incinerators.
4. Thermal equipment sector: Construction of furnace lids and irregular sections of flues in hot blast stoves and electric arc furnaces.
5. Kiln operation and maintenance sector: Localized emergency repairs and patching for various industrial kilns, as well as construction of irregular linings.
Industry Pain Points
1. Traditional brick-lined kilns have numerous joints, prone to air and heat leakage, resulting in low thermal efficiency, high energy consumption, and frequent joint damage requiring costly repairs.
2. Conventional castable construction requires pre-made molds, leading to long construction times, high mold costs, and inability to accommodate irregular-shaped areas.
3. Frequent kiln starts and stops cause sudden temperature changes, easily cracking and causing traditional linings to fall off, drastically shortening lining life and increasing maintenance costs.
4. Localized kiln damage necessitates cooling down before repairs, resulting in prolonged downtime, significant production losses, and reduced enterprise productivity.
5. Linings in high-temperature, high-wear areas are easily eroded and worn, requiring frequent replacements, which increases refractory material procurement costs and labor expenses for repairs.
Frequently Asked Questions (FAQ)
Q1: What is the construction method for refractory plastic?
A: Refractory plastic leaves the factory as a hard paste and can be shaped on-site by ramming, vibration, or extrusion, without the need for pre-molded forms, offering excellent construction convenience.
Q2: Which operating conditions are suitable for different types of refractory plastic?
A: Clay-based refractory plastic has a max. service temperature of 1500℃, suitable for medium-temperature kiln linings; high-alumina refractory plastic has a max. service temperature of 1600℃, suitable for medium-to-high-temperature kiln linings; corundum-based refractory plastic has a max. service temperature of 1900℃, suitable for ultra-high-temperature, high-wear harsh conditions.
Q3: What are the advantages of refractory plastic in emergency repairs?
A: Refractory plastic can be applied directly to damaged areas without lengthy furnace cooling. After application, it can be quickly put back into service, significantly shortening repair downtime and reducing production losses.
Q4: How does refractory plastic perform in thermal shock resistance?
A: Refractory plastic exhibits excellent thermal shock resistance, tolerating the sudden temperature changes associated with frequent kiln starts and stops, preventing lining cracks and spalling due to drastic temperature fluctuations, thereby effectively extending lining lifespan.
All Rights Reserved © 2026 HUAYAN