
High-Strength Wear-Resistant Castable
Item | Performance Index | |
|---|---|---|
Al₂O₃ % Not Greater Than | 80 | |
ZrO₂ % Not Greater Than | 0.5 | |
CaO % Not Greater Than | 4.0 | |
Compressive Strength After Heat Treatment at Same Temperature MPa Not Less Than | 110℃ | 80 |
1100℃ | 100 | |
1500℃ | 120 | |
Bending Strength After Heat Treatment at Same Temperature MPa Not Less Than | 110℃ | 8 |
1100℃ | 9 | |
1500℃ | 10 | |
Linear Change Rate % Not Greater Than | 1100℃×3h | 0.5 |
1500℃×3h | 0.5 | |
1 1 0 ℃ Bulk Density Kg/m³ | 2.9 | |
Refractoriness ℃ | 1800 | |
Product Overview
High-strength wear-resistant castable is an integral refractory material whose core advantage lies in being unrestricted by kiln structure or installation location, allowing for rapid large-scale construction. Formulated with corundum as aggregate and high-quality high-alumina cement as binder, along with several additives, this product is a hydraulically set high-strength refractory castable primarily used as a refractory lining material for high-temperature, highly abrasive areas within thermal process kilns. Manufactured strictly in accordance with JC/T498-92(96), it is classified into two grades based on performance—Premium Grade and First Grade—with physicochemical properties fully compliant with standard requirements. Its initial setting time is controlled within a reasonable range of no less than 30 min and no more than 240 min, ensuring ample working time while meeting the need for rapid hardening.
Technical Principle
The performance of high-strength wear-resistant castable relies on its raw material proportions and the core principle of hydraulic bonding. Corundum aggregate boasts extremely high hardness and excellent high-temperature stability, enduring prolonged thermal shock and material abrasion under high-temperature conditions, serving as the primary source of the product’s high strength and wear resistance. High-quality high-alumina cement acts as the binder; upon mixing with water, it undergoes hydration reactions to gradually form a stable hydrated matrix that firmly bonds the corundum aggregate and other additives into a monolithic structure, ensuring sufficient mechanical strength during ambient curing. Added functional additives optimize workability, setting time, and high-temperature stability, further enhancing overall performance. The integral cast-in-place construction process eliminates the need for prefabricated component assembly, allowing direct in-situ mold pouring. Post-vibration compaction forms a continuous, seamless lining structure, fundamentally avoiding the issue of joint erosion by high-temperature gases and materials common in prefabricated refractory brick joints, significantly extending the overall service life of the lining.
Performance Parameters
The product strictly adheres to JC/T498-92(96) standards for controlling physicochemical parameters, with specific specifications as follows:
1. Initial Setting Time: No less than 30 min, no more than 240 min
2. Chemical Composition: Al₂O₃ content not exceeding 80%; ZrO₂ content not exceeding 0.5%; CaO content not exceeding 4.0%
3. Compressive Strength (MPa, not less than): 80 after 110℃ treatment; 100 after 1100℃ treatment; 120 after 1500℃ treatment
4. Bending Strength (MPa, not less than): 8 after 110℃ treatment; 9 after 1100℃ treatment; 10 after 1500℃ treatment
5. Linear Change Rate (% , not greater than): 0.5 after 1100℃×3h treatment; 0.5 after 1500℃×3h treatment
6. Other Properties: Bulk density at 110℃ is 2.9 kg/m³; refractoriness is 1800℃
Core Advantages
1. Excellent High-Strength Wear Resistance: Leveraging the high hardness of corundum aggregate and optimized mix design, the product exhibits compressive and bending strengths far surpassing ordinary refractories after various heat treatments. After 1500℃ treatment, compressive strength reaches 120 MPa and bending strength reaches 10 MPa, enabling long-term endurance against material scouring and abrasion under high-temperature conditions, thereby greatly extending lining service life.
2. Outstanding High-Temperature Performance: With a refractoriness of up to 1800℃ and linear change rates not exceeding 0.5% after both 1100℃ and 1500℃ heat treatments, the product demonstrates exceptional volumetric stability at high temperatures, avoiding significant shrinkage or expansion deformation, making it suitable for long-term operation across diverse high-temperature thermal equipment.
3. Convenient and Efficient Construction: As an integral refractory material, it is unconstrained by kiln structure or installation location, allowing direct in-situ mold pouring without complex prefabrication and assembly procedures. This enables rapid large-scale construction, significantly shortening kiln construction or maintenance cycles.
4. Controllable Setting Time: With initial setting time maintained between 30 and 240 minutes, ample operational time is provided for mixing, pouring, and vibration compaction, preventing premature setting that could compromise construction quality, while also allowing rapid hardening post-construction to expedite curing and commissioning phases, thus improving construction efficiency.
5. Strong Resistance to Chemical Erosion: Optimized chemical composition ratios (Al₂O₃≤80%, CaO≤4.0%, ZrO₂≤0.5%) confer excellent resistance to chemical attack, effectively guarding against erosion from high-temperature flue gases and ash residues, reducing corrosion-related lining degradation.
6. Guaranteed Compliance: Manufactured strictly according to JC/T498-92(96), with physicochemical properties fully meeting standard requirements, the product is available in Premium and First Grades, offering flexible selection based on specific operating conditions for enhanced adaptability.
Core Value of the Product
1. Extends Kiln Lining Service Life: Comprehensive properties of high strength, high wear resistance, high-temperature tolerance, and chemical erosion resistance significantly reduce lining degradation under high-temperature conditions, decreasing maintenance frequency and costs while boosting overall equipment operational efficiency.
2. Shortens Construction and Maintenance Cycles: Integral cast-in-place construction and controllable setting time enable rapid large-scale installation, drastically cutting down new kiln construction or old kiln overhaul timelines, helping customers achieve faster production start-up and improved economic returns.
3. Adapts to Complex Operating Scenarios: Unconstrained by kiln structure or installation location, it suits various intricately structured thermal equipment parts, resolving the pain point of traditional prefabricated refractories struggling to fit irregular or complex geometries.
4. Flexible Compliance-Based Selection: Classified into Premium and First Grades per standards, users can flexibly choose the appropriate grade based on temperature, wear level, and erosion intensity requirements, achieving optimal balance between performance and cost.
Target Customer Groups
Thermal power generation enterprises, circulating fluidized bed boiler manufacturers, production and operation companies of various thermal process kilns (such as metallurgical, building materials, and chemical kilns), kiln construction contractors, refractory material suppliers, and industrial high-temperature equipment maintenance service providers.
Application Scenarios
This product is primarily used for high-temperature, highly abrasive areas of thermal process kiln linings, especially suitable for various complex structural parts of circulating fluidized bed boilers, including air distribution plates, slag discharge pipes, dense-phase zones of the furnace chamber, furnace outlets, cyclone separators and their inlet/outlet ducts, return devices, and coolers—structures that are relatively complex, allow for direct mold pouring, and experience minimal vibration. Additionally, it can be adapted for lining construction in various high-temperature thermal kilns across metallurgy, building materials, and chemical industries, such as rotary kilns, heating furnaces, and incinerators, where high-temperature, highly abrasive areas exist. Thanks to its integral cast-in-place nature, it perfectly accommodates lining needs for various irregular and complex structures.
Industry Pain Points
1. Traditional prefabricated refractory brick linings suffer from numerous gaps, allowing high-temperature flue gases and ash to infiltrate, causing overall lining detachment and short service life. The product’s integral cast-in-place structure forms a seamless continuous lining, fundamentally solving gap erosion issues.
2. Ordinary refractories lack sufficient strength, easily eroded by materials under high-temperature conditions, leading to frequent lining maintenance and disrupting normal equipment operation. The product’s high strength and wear resistance significantly enhance abrasion resistance, reducing maintenance frequency.
3. Some refractories have unreasonable setting times—either too fast, limiting construction time and compromising quality, or too slow, prolonging curing periods and delaying production start-up. The product’s initial setting time is controlled within a reasonable range of 30–240 min, balancing ease of construction with efficient hardening.
4. Ordinary refractories exhibit poor volumetric stability at high temperatures, prone to shrinkage or expansion deformation, resulting in lining cracks and detachment. The product maintains a linear change rate of no more than 0.5% even after 1500℃ heat treatment, demonstrating excellent volumetric stability and effectively preventing deformation and cracking.
5. Refractory material installation in complex structural areas is difficult, with poor adaptability of prefabricated components. The product is unconstrained by kiln structure or installation location, allowing direct in-situ mold pouring, perfectly meeting the construction demands of various complex and irregular structures.
6. Some refractories lack clear standardized controls, leading to unstable performance and inconsistent quality. This product is manufactured strictly according to JC/T498-92(96), featuring defined performance indicators and stable, reliable quality.
Frequently Asked Questions FAQ
Q1: What is the setting time of high-strength wear-resistant castable? Will it affect construction efficiency?
A: The product’s initial setting time is controlled within the range of no less than 30 min and no more than 240 min. This provides ample time for mixing, pouring, and vibration compaction, preventing premature setting that could harm construction quality, while also enabling rapid hardening post-construction to shorten waiting times for curing and commissioning, thus balancing quality and efficiency.
Q2: What is the applicable temperature range for high-strength wear-resistant castable?
A: With a refractoriness of up to 1800℃, the product retains a compressive strength of 120 MPa and a linear change rate below 0.5% even after 1500℃ heat treatment, making it suitable for long-term use in environments up to 1800℃ and meeting the high-temperature needs of various thermal process kilns and circulating fluidized bed boilers.
Q3: What grades are available for high-strength wear-resistant castable, and how should I select one?
A: According to JC/T498-92(96), the product is divided into Premium Grade and First Grade based on performance. Customers can choose the appropriate grade according to actual needs—such as operating temperature, wear level, and chemical erosion intensity—to achieve the optimal balance between performance and cost.
Q4: Where can high-strength wear-resistant castable be applied? Is it limited by kiln structure?
A: As an integral refractory material, it is not restricted by kiln structure or installation location. It is particularly suitable for complex structural parts of circulating fluidized bed boilers—such as air distribution plates, slag discharge pipes, dense-phase zones of the furnace chamber, and cyclone separators—that allow for direct mold pouring and minimal vibration. It can also be used in high-temperature, highly abrasive lining areas of various thermal process kilns.
Q5: What are the core raw materials of high-strength wear-resistant castable, and what are its key characteristics?
A: Made with corundum as aggregate, high-quality high-alumina cement as binder, and supplemented with functional additives, the product features high strength, high wear resistance, high-temperature tolerance, chemical erosion resistance, and excellent volumetric stability, effectively extending kiln lining service life.
All Rights Reserved © 2026 HUAYAN